How to fix a fishing reel

How to fix a fishing reel

How To Fix A Fishing Reel What You Need to Know

Fishing is one of those activities that people either love or hate. For some, it is a way to relax and get away from the hustle and bustle of city life. For others, it is a means of earning a living. Regardless of your take on fishing, there’s no denying that it can be a lot of fun if done the right way. Unfortunately, not everyone knows how to do it the right way. In this article, we are going to teach you how to fix a fishing reel. By following these simple instructions, you will be able to fix your reel in no time at all!

 

 

How to fix a fishing reel that won’t lock?

The most common reason a fishing reel won’t lock is because the line has become crossed. To fix this, you will need to remove the line from the reel and re-cross it in the opposite direction. Once you have accomplished this, put the reel back together and start reeling in. Make sure that when re-crossing the line, it is done smoothly and gradually so as to not damage the fishing reel or motor of your boat!

Furthermore, if splicing lines is something that you have dabbled with before then make sure to use some new test threads before wrapping a hundred yards of line around one section making any mistakes at all extremely noticeable which will lead to a very delayed fix. So, that is how to fix a fishing reel without breaking it!

 

 

How to fix a fishing reel that won’t reel in?

If the fishing reel is not reeling in, then it is likely that the spring has fallen out. The internal parts of the reel are also a potential problem and you may need to replace them. The line is tied to the fishing reel incorrectly. This may be a common mistake because you are trying to tie the knot while reeling in.

It might also be that the fishing reel requires a specific type of knot or pinched around the hook, as this could cause your rod not to work properly and you will end up having a difficult time reel in the fish. The line is tangled or wrapped around the reel spool in such a way that it can’t work and you will have a difficult time reeling in the fish without cutting off the line first. The fishing reel may be losing power due to an issue with the gears or rotating armature.

There may also be a small gear or other parts that can get stuck, causing the reel to not work properly. And you will have a difficult time reeling in the fish. The fishing reel may be broken and need to be replaced. There may also be a small gear or other parts that can get stuck, or jammed by a foreign object, such as a piece of weed.

A crankbaits and spinnerbait might be stuck on the bottom in brush or rubble. Check the line and lure carefully, particularly around rocks or other obstructions. If you can’t get the line to turn over freely, you need to remove any objects causing resistance before you try again.

 

Fix a fishing reel

How to fix a fishing reel handle?

To fix the fishing reel handle, you will need to remove your line from it. Next, turn off the motor of your boat and cut or uncouple all things connected to it so that there is nothing for them to pull on! On one end of this free end are a few pieces made up o hooks plus some kind of hook guard as well. Whatever dehooker tool/tool rest combination they have they may use can help here often enough by making all the hooks and whatnot float.

However, having a fishing line wedged up inside your reel can also jam it so be aware of this too! A foot-long piece of pipe or big wire from the hardware store bent into a hook shape will help with scraping these chunks out by catching them on their interior point which is pretty sharp like a tacks needle.

I would caution you to only use it for retrieve type rods knowing that you will be starting at the tip most of the time, damaging your line there. The rest of you needs to keep don’t use it! I also remember using a big spring tool as an external retrieve-stop/rosette on my older ones but never used one that was built in so replacement tools would have been more difficult.

What happens if these things pop off? Well, the line can get wrapped around their guides causing them to fail. A spring or an inside event may have caused this or a bad connection at one time too which means you will need to repair it as there is gear involved either way here so don’t go breaking other parts! I hope that had been helpful regarding how to fix your reel handle.

 

 

How to fix a spinning reel?

Anglers are people who love the outdoors and fishing. They are passionate about catching fish and enjoy spending time in nature. For those who have a spinning reel that is not working, there are a few steps to follow in order to fix it. The first thing you need to do is identify the problem with your reel.

  • Is it not reeling smoothly? Does it not cast as well as before? Is the line tangling up inside of the reel?
  • If you’re having trouble casting, try loosening or tightening your drag knob until the line casts smoothly again.
  • If the line is still tangling up inside of your reel, try removing all of the lines from your spool and then rewinding it back on top of itself so that there’s no slack left in between each coil.
  • If the line isn’t reeling smoothly, try using a pencil eraser to very gently work the gears inside of your reel.

 

How to fix a spinning reel bail?

A spinning reel bail is a part of the fishing reel that holds the line in place on the spindle. When it is not functioning properly, you will have a hard time catching fish. To fix the spinning reel bail, first, identify what’s wrong with it. If it is not spinning correctly or if the spring has broken, you will need to replace it with a new one.

To replace the spring, you must remove the spool. This can be done by loosening all four bolts that hold the spool in place. You will then slide it out until it is loose enough to come off easily and set it aside with the other parts of your reel.

Once you have removed the spool, you will need to unscrew the top of the rod. You will then need to remove the spool nut and screw the new one in. After you have replaced the spool nut, you will need to put it back on.

Once this is done, slide the top of the rod back into place and tighten it. With the bolt that is holding it in place. You will then need to put the spool back on and tighten all four of the bolts that are holding it in place.

When the reel is not spinning properly because the spring has broken. To fix it, you will need to unscrew the top of the rod and replace the broken spring with a new one.

 

How to fix a spinning reel drag?

If the reel is not spinning at all, you may need to replace the motor. If the reel is vibrating excessively when you aren’t using it, a loose bearing may be causing this problem. A lot of times simply replacing the bearings will solve any excessive vibration or high pitched tone that’s occurring during use.

Hint: If your spinning reel doesn’t seem to have enough drag being put on it by turning too quickly, dial in what kind of drag you feel most comfortable with.

  • Loop release hooks & leaders have to be changed properly and at regular intervals.
  • DO not put your pole in a bucket of water or you will irreparably ruin it!
  • After pulling up a fish, always come back down with the rod horizontally. With either medium & light wraps check over the line fairly frequently, especially if fishing offshore all day long.
  • DO not use your rod tip as the hook bearing! If it’s light you can end up breaking their nose bone or lip bone with that kind of drag and they will generally die within 4 hours.
  • DO not reel-in upside down without contacting your forward line with one finger! It messes up all the mercury!! If moving towards slackline bulkhead right side up!
  • DO not use the line lock on Great Lakes spinning reels!! It screws everything up and really looks bad. If you get a broken thread in your spool, which happens occasionally, just tie it down using three thin pieces of stray mono or KT mono as these are most stretchy and slightly thinner than standard monofilament.

 

How to fix a spinning reel handle that breaks?

If the plastic handle on your spinning reel breaks, you can fix it by following these steps:

  • Remove the screws that hold the handle down.
  • Lift up the handle and pull it off of the spindle.
  • If there is a gear inside of the handle, remove it using a screwdriver or pliers. Be careful not to damage any wiring connections.
  • Thread a new line through the handle and spindle onto a hook.
  • Keep in mind that you will probably not be able to get a new handle from your local tackle store because they all use different sizes/threads for grips inside of their plastic handles. And also, if it’s geared or has fishing jigging gears then you likely don’t have much luck trying this yourself. Get someone else who knows what they are doing to handle this!

If the carbon handle on your spinning reel breaks, you can fix it by following these steps:

  • Rather than pulling off a broken carbon hood that covers any gears and wires. Use pliers to punch through one of two clear rubber gasket type covers. This will give you access to all wiring connections as well as hooks in which you attach the line. You’ll also still be able to fish! Just don’t do this if you are concerned about getting bits of carbon fiber shrapnel into your hand.
  • Pull off any gears, wires, and blades using pliers or a screwdriver as needed. Only remove those different components that seem to be located within the handle itself because they shouldn’t need to be removed in order for you to repair the plastic handle part of your reel!

 

How to fix a spinning reel that won’t reel in?

  • Check your line tension. If the line is too tight, then the spool may not have enough play. Try loosening the line slightly.
  • Make sure the reel has been properly lubricated. Lubricate the bearings and the gears with grease.
  • Clean out any dirt from inside the reel.
  • Replace the drag knob if it’s worn down or broken.
  • Check the spring tension. If it’s too loose, then the spring could be stretched out. Tighten the spring.
  • Check the bail. If it’s bent, then the bail pin could be stuck. Remove the bail pin and try again.

 

How to fix a spinning reel that won’t lock in place?

If your spinning reel won’t lock in place, you may need to adjust the drag system or replace the bearings. Because the drag knob is located on the handle, it may be loose and not properly engaging with its end of travel stop. You can loosen this up in order to get a better feel for what your spindle is doing.

It’s also possible that if one side of the bearing has worn down excessively. Then simply replacing bearings won’t fix the problem. As often happens, one of your bearings (it’s internal ball bearings) must be moving in a different direction from its neighbor within that bearing. This means you can swap out some parts and end up with the very same problem: the spinning reel will not lock in place causing it to wobble side-to-side or other issues!

 

 

How to fix a baitcasting reel?

If the baitcasting reel stops working properly, there are a few things you can do to fix it.

First, check to see if the reel has been overstretched. If so, you will need to stretch the reel back to its original length using the instructions provided with the reel.

After stretching the reel, make sure it is tightened down all of the way with the proper tools.

Finally, test the reel by casting a small piece of thin monofilament line around the reel’s spool. A properly-stretched and tested baitcasting reel should not have any noticeable problems from this test.

Additional tips for fixing a spinning or baitcasting bottom fishing reels that won’t spin at all: by way of background information 9/10 times you will be able to fix one of these types of situations, but often fairly short term fixes only! These are things like broken swivels or the bearings that are out-of-whack somewhere.

First thing is to make sure the reel’s swivel on both sides isn’t broken. To do this you will need to see if there is material missing where your guide ring and line spool meet up at each side of the reel. If so, I recommend getting new spools because if you try to fix it with a replacement strap. Your reel could end up only working as half of what it does.

The easiest way is probably to replace the whole spool in these situations and get one that has been re-engineered for baitcasting systems such as whitefish I would highly recommend getting either an Evo Lite or Maxima Omega Series Spools (or maybe even both). These will have offset swivels so they can be used disconnected and just one swivel will work like that.

 

How to fix a baitcaster that won’t reel in?

The most common reason baitcasters don’t reel in is that the line has become tangled in the gears. To fix this, first, remove any hair or string from around the gears. Use a blunt tool or pliers to gently pry the line away from the gears, and then re-attach it with a new knot.

If the line has become completely tangled, you may need to take apart the baitcaster and clean out all of the debris build up. Be sure you clean all of it out! Cleaning the bearing and gears should take care of most issues. As long as all traces of hair or string are removed from around them.

 

How to clear a backlash on a baitcasting reel?

If you experience backlash on your baitcasting reel. There are a few things that you can do to try and correct the issue. Clearing the backlash will vary depending on the severity of the problem. So it is important to take into account what is causing it in order to resolve it. If you believe that your reel has lost its tension or bearings have become jammed, then clearing these issues may be necessary.

However, if your reels backlash is a result of wear, then trying to clear it without replacing parts could be hazardous. If you are able to determine the cause of your backlash and restore lost board feel using a simple fix or lubrication method as needed. Then it would probably be better suited for putting off replacement hardware until later issues can become more apparent.

Usually, by this point, there won’t still have been additional damage that occurred due to the issue. But would have put in good time to distinguish the two. Regardless of exactly how it was causing your backlash though there are some quick methods that you can try to improve things.

Some of these techniques include manipulating parts, adding more grease, or stuffing small pieces in oil passages. While others claim to clear issues by returning the system back to its original specifications and reducing pressure as needed. A few find luck with a unicyclist method which helps return tension through flexible connections between grips on different parts.

 

 

How to fix a spincast reel?

There are a few different techniques that can be used to fix spincast reels. Some involve manipulating the parts, while others require changing the settings on the reel. If it is determined that the backlash is due to wear or other damage, then a simple fix may be all that is needed.

However, if your backlash is a result of another issue. Then it may be necessary to replace parts in order to fix the issue. Follow these steps in order to troubleshoot a backlash on your reel. And use any other relevant information gathered during your diagnostics that can help you decide what part is bad:

Spincast Reel Parts List To begin the process of fixing a missing or misaligned spincast urge. There are many things which may vary between different types of reels.

However, if one applies this list to most models, they may be able to spend time troubleshooting the issue rather than worrying about what part is broken first. As you examine your set-up, pay attention to these common spincast reel parts for problems that can cause backlash and other issues.

Some spincast reels don’t make use of constant-torque mechanisms that can cause backlash issues or some other problem. This allows for a very important change in how serious an issue with your reel may be understood by simply “talking” about it as opposed to assuming its critical nature when you assume there is no need for an ultra-precise mechanism.

 

How to fix a spincast reel won’t reel in?

One problem that can occur with many spincast reels is that they will not reel in the bait. This issue may be due to a number of reasons. But usually, it is caused by a lack of tension on the line or by problems with the drag system. In order to fix this problem, you will need to tighten up the drag system or replace it altogether.

If you are using a monofilament line, you may also have trouble with the spool being dragged by a hook as well. For this purpose, you will need to replace your monofilament line (which should be sold separately at any tackle shop). And replacing it can sometimes require knowing how to remove it from its reel or rewind mechanism.

You may also have some other issues that are related to the problem of not reeling in bait, such as low stamina on a long cast. And those problems may be highlighted in a manner of ways like that.

 

How to fix a spincast reel not releasing?

You will occasionally come across reels with this problem, as well (as you read about it here): the spool of your fishing reel won’t release when you are ready for it too. This problem is usually caused by misaligned mechanisms on these cheaper models and can be solved through several different means. Like the addition of a new pin for the spool mechanism. Which will in turn replace another faulty component so that it is working properly.

You may also have this problem if you are using too much tension (too little slack) on your line and reel – or lighting up wrongly to use more string on your bait than recommended by manufacturers. Fishermen will often adjust their casts since they can easily end up with two fish landed. Although one was not quite the “big one” that they wanted.

Sometimes, fishermen also may have a problem with just having too much tension on their line. Which can cause problems for themselves and their fish as well. These spincast models are only meant to be used by those who know how it works. Getting them from experienced fishermen or seasoned tackle retailers/managers.

It is also recommended that you might purchase a floater – just in case, which will help catch your big fish more easily.

 

How to fix a spincast reel drag?

Fishing reels are just like any other piece of sporting equipment and can have problems from time to time. Sometimes, the reel will become bogged down with fish or vegetation and cause a drag on the line that makes it difficult to cast. These types of reels use a system of gears and spinners to bring your bait back into position for another cast. So if there is something preventing these components from working properly then it can lead to trouble.

If the reel is not frozen, remove it from your fishing line and make sure that you have a pair of needle-nose pliers in your tackle box along with a Philips screwser [or similar tool] to undo one of the bail release buttons on top (the button seems to be positioned wherever they think is best).

The parts used are available at any hardware store or gardening supply shop everywhere. So no need for lifting likely useless heavy pieces of metal from a fishing supply shop. With your pliers and screwdriver ready, simply undo both the bail release button on top (situated near to where those strings come out) along with any swivels below it.

 

 

How to fix a push button reel?

Push button reels are most commonly fixed by taking the entire reel apart, cleaning all of the gears and contacts, greasing them where necessary, and putting it all back together. So here are the steps:

  1. Take apart individual parts such as the spool, and metal part that is connected to the hand paddles using an Allen wrench or pliers; cleaning all of your gear pieces will help ensure proper functioning in the future.
  2. Greasing these gears with light oil results in a smooth drag when you reel it back while greasing certain areas can result in loud clicking noises which may be annoying if you have neighbors.
  3. Re-assemble all of your parts back according to the steps listed above and make sure that there isn’t anything broken. Perhaps a piece of plastic was lost in the process during assembly.
  4. Put your reels away again – keep working with children; this may seem like a good idea as it saves them from such potentially dangerous chores/activities. But never EVER leave them unsupervised.

I hope that this article was helpful, if you have any other problems with the above just comment!

 

 

Finishing Up

Fixing a fishing reel can be tricky. But with the right tools and instructions, it can be done quickly and efficiently. Our blog focuses on providing helpful tips and instructions for fixing various types of fishing reels. So be sure to check it out if you’re having trouble with yours. In the meantime, keep fishing, and thanks for reading!

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top